The clean transfer window, also known as the blow-through transfer window, is an auxiliary equipment for the clean studio and the clean workshop.It is mainly used for the transfer of small items between clean rooms, clean rooms and non-clean rooms, and can function as an air lock. To prevent air convection between clean rooms.To reduce the number of door opening in the clean room.
MCT-PAB-01 Non-self-cleaning ordinary
MCT-PAB-03 VHP sterilization transfer window
The air is filtered through the primary filter on both sides of the transmission window and then pressed into the static pressure box through the low-noise centrifugal fan. After being filtered by the high-efficiency filter, it is evenly blown from the top diffuser into the transfer window. In the area, this cycle is used to achieve the purpose of cleanliness.The two doors of the blowing transfer window can be controlled by mechanical interlocking or electronic interlocking,so that the two doors of the blowing transfer window cannot be opened at the same time, so that the airflow between the clean rooms cannot be convected.
The transmission window is made of all-stainless steel plate bending and welding, which can effectively avoid rust, smooth surface, easy to clean,disinfect and resist corrosion. The interior adopts a circular arc design, which is smooth, does not leave a dead angle,and is easy to clean.The top of the work area is equipped with ultraviolet germicidal lamps; the two doors adopt embedded structure, double-layer tempered glass, computer version mechanical chain, and the two doors will not be cut off when the power is off.automatically open.The self-cleaning transmission window is equipped with two pressure difference gauges,one monitors the high-efficiency filter resistance pressure difference,one monitors the pressure difference between the two ends of the transmission window, and configures the cumulative function of the ultraviolet germicidal lamp.
1.The box body adopts a unique negative pressure design to ensure that the box weld and the filter frame are not leaked;
2.Provide high-end product customization services, and have non-standard, high-end product design, customer use cases;
3.The clean room laminar flow provides a one-stop product service;
4.The verification data is complete and meets the requirements of the new GMP and FDA related documents.